Product properties
The DPF/Catalyst Cleaner dissolves and removes all contamination and soot residues from the particulate filter and the catalyst –
no disassembling required. The product eliminates any performance decrease or disruption caused by contaminated particulate
filter and catalysts. DPF/Catalyst Cleaner restores the complete function of the diesel particulate filter and catalyst.
The product is also ideal for EGR-valve cleaning.
- Dissolves and removes contamination in the diesel particulate filter and catalyst.
- Cleaning without dismantling
- Evaporates residue-free

Cleaning of the diesel particulate filter and catalyst.
Area of application
Attention: The motor must be in hot operating condition. Shake the can well before use! (Approx. 1 min)
Dismantle the temperature, pressure sensor or access port on the DPF / catalyst and insert the probe through the opening. Spray
the cleaner with the probe inserted into the particulate filter/catalyst in 5-second intervals until the DPF / catalyst is proper filled
with the foam. Close the opening after application. When the cleaner has been applied the deposits are released and dispersed in
the particulate filter/catalyst. During the normal drive operation the micro-fine dirt particles combust. Restart the regeneration
process through a workshop tester. Finally remove the faulty memory entry or delete existing errors. Afterwards perform a test
drive consisting of about 20 minutes.
DPF/Catalyst Cleaner is usable for all closed particulate filter systems. Check the oil level before cleaning. Oil change is
necessary if oil dilution is performed with diesel.
For an optimized regeneration we recommend to add the DPF Clean (43241) into the fuel tank after doing the test drive. For petrol
engines we recommend OXICAT (43243).
Application
Consumption
Sufficient for one application / diesel particulate filter / catalyst.

Available size 400ml Item no.43159